shape cutter tool and/or templates (we used Fiskars Shape Cutter with the square and heart templates)
adhesives (we used a Xyron adhesive machine, you could also use spray adhesives or glue sticks or adhesive runners)
decorative photo corner punch with removable guard (ours is by EK Success)
round hole paper punch
narrow strip of red paper

Step 1. We used the Fiskars Shape Cutter with the square and heart templates to cut the shape for this tag. You can make your tag any size you like. The tag in the photo measures 3 1/2 inches square. The inner dark green square measures 2 1/2 inches. We then cut two small hearts to layer inside the smaller square.

Step 2. Use the punch to punch the corners of the outer square. Remove the corner guard from the punch and punch once in the center of side of the square.

Step 3. Weave the small dark green square into the punches to old it in place.

Step 4. Spray the back of the hearts with spray adhesive or you can alternatively run the pieces through an adhesive machine like those made by Xyron.

Step 5. Glue the larger heart on the center of the inner square and glue the smaller heart on top of the larger heart.

Step 6. Use a round hole punch to punch a hole in the center top edge of the tag. Thread a narrow red paper strip through the hole in order to attach it to the gift.

Shop for Paper Crafting Supplies at Amazon.com.